CHAIN shackles
SUPER STRONG CARBON
- Rated for overhead lifting
- All shackles meet or exceed Federal Specification RRC-271D and ASME B30.26
- Working Load Limit and traceability codes shown as permanent marking on body and pin
- Available in painted, galvanized and self-colored finished (Dacromate coating upon special request only)
- All shackles have alloy quenched and tempered pins
- Shackles made from technically advanced microalloy material
- Load break tests consistently show microalloy outperforms quenched and tempered carbon material
- Shock load testing of assemblies at -300ºF consistently demonstrate microalloy outperforms quenched and tempered carbon material*
- Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order
- Proof tested at 2.2 times the working load limit
- Ultimate strength equals six times working load limit
- Shackles exhibit extreme deformation before failure*
- Do not exceed working load limit
- When shackles need to be used above 400ºF (204ºC) or below -40ºF (-140ºC), consult factory
- Typically used in straight line corrections
- More compact than typical anchor shackles
- Ideal when securing guy lines or wire rope fences
*Independent lab verified
Screw Pin
Bolt, Nut & Cotter
CHAIN
- Rated for overhead lifting
- Shackles meet or exceed Federal Specification RRC-271D, and ASME B30.26
- Working load limit and traceability codes shown as permanent marking on body and pin
- Available in painted, galvanized and self-colored finishes
- (Dacromate coating upon special request only)
- Special products engineering available to fit your special lifting, tie down, and pulling needs
- Proof tested at 2.2 times the working load limit
- Do not exceed working load limit
- When shackles need to be used above 400ºF (204ºC) or below -40ºF (-140ºC), consult factory
- For more information on industrial / government products visit us at www.cmpatriots.com
*Independent lab verified
Bolt, Nut & Cotter
Lodestar with Series 635 motor driven trolley
Lodestar with Series 635 low headroom trolley
Columbus McKinnon Training
KNOW HOW... KNOW WHY
Columbus McKinnon is a global leader in providing expertise and training in the proper use and inspection of rigging and overhead lifting equipment. With a range of comprehensive programs and seminars conducted at venues throughout North America, as well as on site at private companies and industries, Columbus McKinnon courses include:
- Hoist Maintenance
- Load Securement
- Crane & Hoist Inspection
- Mobile Crane Operator
- Rigging
- Safe Hoisting
- Crane Operator Training
- Rigging Gear Inspection
Classes are available at our Niagara Training Center and the state-of-the-art Hoist & Rigging Training Center of Excellence in the Center for Occupational Health and Automobile Manufacturing (COHAM) lab at The Ohio State University. The COHAM lab is a hands-on learning center which allows attendees to understand how to properly use and inspect overhead lifting equipment. This leading edge training program is designed to increase workplace productivity and safety in an ergonomically friendly environment.
In addition to the strong knowledge base exemplified by comprehensive training programs, Columbus McKinnon is one of the only manufacturers supplying complete lifting systems to satisfy unique material handling requirements of users in a variety of environments. From jib cranes and hoists to chain slings, clamps, and related attachments; systems include products that are matched specifically to the lifting neeeds of the application. Products may also be modified in order to ensure that th eproper system is in place for the job.
Whether your needs call for a single CM Bandit hoist or a completely engineered system to outfit your production facility, Columbus McKinnon provides the products and expertise to keep your workforce productive and safe.
